About Us
Listing Photo

John Cooper Paving & Sealing, Inc. offers professional paving contractors and guaranteed services. No job is too big or too small. From beginning to end, our quality pavers provide excellent service for residential and commercial clients. We offer competitive rates and a 10% Senior Discount. Please call us at one of our three locations for a free estimate or more information. We will return your call within 24 hours and look forward to hearing from you soon.

New Driveway Installation

John Cooper Paving & Sealing, Inc. installs new pavement for residential driveways, or if the condition of your existing driveway is beyond repair due to normal earth settlement and cracking.

Basic Installation Process

• A bobcat is used to remove the existing
driveway, if needed. The materials are
then hauled away in our dump trucks.
• Excavation work is done with a bobcat
in order to remove any rocks, roots,
very small stumps, and any other
impurities that may be in the area.






• In order to attain a proper grade of the driveway and serve as a base to the asphalt,
approximately 4 to 6 inches of processed stone, or gravel, is spread and graded.
However, there are times when some driveways may have small puddles due to
drainage. When we feel that we are in a situation such as that, we do not hesitate to
discuss it with our customers. The grading process is then followed by complete
compression with our 2 to 3 ton roller.
• Commercial road top asphalt is dumped from our truck into the paver unit. The paver
unit lays and slightly compresses approximately 3 inches of asphalt and 1 and a half
inches of top coat asphalt with compaction in between. To complete compression of the
asphalt, it is rolled with the roller. Our compaction plate is then used in areas such as
the edge of the driveway, where the roller cannot get to.
• Finally, glue and stone dust are added to the end of your driveway, which actually
adheres it to the street. Stakes with caution tape are put down so that traffic will not
pass through.

Driveway Overlay Installation

• Driveway Overlay usually applies to driveways with little or no cracks and driveways
that already have base coat asphalt. A driveway overlay is also an option when
someone is adding a new section of asphalt to their already existing driveway. They
could overlay the existing driveway while installing the new section giving it the look
of one brand new driveway.

Basic Overlay Process

• The existing surface is cleaned extensively.
• Top coat asphalt is dumped from our truck into our paver unit. The paver unit lays
and slightly compresses approximately 2 inches of asphalt. To complete compression of
the asphalt, it is rolled with our roller. Our compaction plate is then used in areas such
as the edge of the driveway, where the roller cannot get to.
• Finally, glue and stone dust are added to the end of your driveway, which actually
adheres it to the street. Stakes with caution tape are put down so that traffic will not
pass through.

Years in Business

John Cooper Paving & Sealing Inc. has been in business for 62 years.

Special Offer

Free Estimate!

CALL NOW
Local: (508) 232-6220
Request Phone Call
Full Name :

Phone Number :

Email Address :

Testimonials
"Great overall experience"
Michael Easton, MA
"Great Installation Crew"
Peter Westwood, MA
"Highly recommend this company"
Marie Westwood, MA